Garage Sale

LED IR (Infrared Illuminator)
24 Ultra-Bright IR LEDs - Assembled and Tested

These are the LED SpotLight PCBs, fully assembled and tested with 24 940nm LEDs installed and tested. More details on this item can be found on the LED IR Illuminator Page.

4-LED Module - Ultra-Bright White
Water Resistant

These modules are approximately 3cm long, 2.5cm deep and 1.5cm tall. Each module contains four ultra-bright White LEDs (each LED is 15,600mcd with a viewing angle of 130 degrees) prewired for usage between 9v and 15v DC. Modules have connection wires attached to each end enabling end-to-end connections.

LED Light Strips - LED Lite Bars Pre-Assembled with Ultra-Bright LEDs Installed

Our LED Lite is very popular and we customize many of these for different customers. These products are left over from larger orders that were not needed. Each board is pre-assembled and tested and wired for 9v to 12v DC operation.

We have several models available is listed:

1) LED Lite with our WC461-10 Ultra-Bright White LEDs - a total of 9 units are available.

2) LED Lite wtih our BC451-08 Ultra-Bright Blue LEDs - a total of 18 units are available.

3) LED Lite with our OC451-01 Ultra-Bright Orange LEDs - a total of 10 units are available.

LED fX
LED Lighting Effects Controller

The LED fX is an extremely simple and effective design, specifically engineered to control 16 individual output ports. Each port has an LED attached to it, allowing for attractive effects to be achieved by running customized code on the built-in PIC processor.

The unique design allows for the selection of various lighting effects stored on the processor by selecting a routine from the onboard DIP switch. The processor will run the built-in routine selected and display the output on the LEDs.

The LED fX PC board is a high quality, double-sided board, complete with solder masks on both sides, plated holes along with a high-contrast silk-screen labeling component positions. Compact in size at only 3 15/16" x 3 15/16" (100mm x 100mm) and ready to fit into standard size project cases.

Effects are individually selected by setting the programming DIP switch. 64 selections are available from the DIP switches, although not every effects chip will have 64 different selections available for viewing. Various effects chips are available and will include details on the effects along with the code necessary to access that effect. To see samples of all the various lighting effects on the board, view our effects samples page.

This item is for a fully assembled and tested system, complete with 120v wall adapter ready for you to plug into the wall

PIC16C63A

We have a number of PIC16C63A processors available. These are NOS (New Old Stock) and are available for a great price. Over 5,000 pieces are avaialable in total.

Detailed Specifications:
Package Style: 28-DIP (.3")
ROM Memory Size: 4K x 14
RAM Size: 192 x 8
I/O Lines: 22 Processor
Max Speed: 20MHz
Oscillator Type: Xtal/RC External
Program Memory Type: OTP

PictureTel PTZ-2N
Pan/Tilt/Zoom Color Camera

The Picturetel PTZ-2N is a NTSC color video conferencing camera that can do pan, tilt and zoom. Is has the ability to zoom optically up to 10X, 200 degree of pan, 60 degree of tilt with a minimum lighting requirement of 7lux. Video output is through a standard RCA plug.

We have a total of three cameras available, each with their own 12v power supply included. Units have been tested for base functionality (no pan/tilt test) and worked flawless. These are available separately, or all three at once.

To operate the Pan / Tilt / Zoom capabilities, you will require an interface cable which can either be purchased or assembled easily. See here or here for for information on building your own control cable.

LED MR16 - Assembed
With Nine Ultra Bright White Piranha LEDs

These units have been pre-assembled and tested for 9v to 15v DC. A number of these are available.

LED MR16 - Assembed
With Nine Ultra Bright White 5mm LEDs

These units have been pre-assembled and tested for 9v to 15v DC. A number of these are available.

Ultra-Bright Flexible
LED Light Strip

We have available a number of our flexible LED light strips available in various lengths, and come with connection lead wires attached (usually 12", although some are shorter). These units are 100% functional, measuring 0.32" wide by 0.1" tall, and have a viewing angle of 120 degrees. LEDs are spaced 0.65" apart and can be trimmed in three-LED lengths (approximately every 1.9").

Modules run on 12v – 15v DC, draw very little current (approximately 150mA for a string of 18 LEDs, or 25mA per set of three LEDs), generate almost no heat, are immune to vibrations, are tiny in size and are super easy to mount. Each LED Strip comes equipped with 3M industrial grade adhesive transfer mounting tape (the same type used to hold nameplates and decorative trim on automobiles, appliances and electronics).

Just how bright are the LED Strips?
Blue: Produce 12,500mcd at 465nm
Red: Produce 7,600mcd at 624nm
Green: Produce 11,000mcd at 525nm
White: Produce 19,000mcd in Cool White
Yellow: Produce 6,000mcd at 590nm

As can be seen, the luminous intensity is amazing knowing that they are lighting up a full 120 degrees. Below are listed the various lengths we have available in stock. We are also able to provide custom lengths up to 16-foot long. Contact us for more details.

Ultra-Bright Flexible LED Light Strip
Water and Dust Resistant

We have available a number of our flexible LED light strips available in various lengths, and come with connection lead wires attached (usually 12", although some are shorter). These units are 100% functional, are sealed in a silicon membrane measuring 0.40" wide by 0.16" tall, and have a viewing angle of 120 degrees. LEDs are spaced 0.65" apart and can be trimmed in three-LED lengths (approximately every 1.9").

Although these units are sealed in silicon and offer excellent water and dust resistance, we cannot recommend these for use in submerged applications.

Modules run on 12v – 15v DC, draw very little current (approximately 150mA for a string of 18 LEDs, or 25mA per set of three LEDs), generate almost no heat, are immune to vibrations, are tiny in size and are super easy to mount.
 
 
 

Just how bright are the LED Strips?
Blue: Produce 12,500mcd at 465nm
Red: Produce 7,600mcd at 624nm
Green: Produce 11,000mcd at 525nm
White: Produce 19,000mcd in Cool White
Yellow: Produce 6,000mcd at 590nm

As can be seen, the luminous intensity is amazing knowing that they are lighting up a full 120 degrees. Below are listed the various lengths we have available in stock. We are also able to provide custom lengths up to 16-foot long. Contact us for more details.

Proto-24
BasicStamp / BasicX-24 Prototype Board Partially Assembled

This item is a Proto-24 prototype board with all the base components. You add your own processor and you will be up and running.

See support web page for more information on this product.

Reference: 2009-01-16-01

Please Note: This product is being sold as-is. We have not tested or verified the functionality of this unit.

Proto-40 Kit PICmicro
Prototype Board & Parts

Supported devices include most of Microchip 40-pin devices including the PIC 16F877, 18F442, 18F452 and others. Included on board is a full peripheral set including a header for in-circuit programming of flash devices, true RS-232C serial input/output with mounting for an on board DB-09 connector, regulated power supply and reset circuitry, and over 700 plated-through holes on the prototype surface.

The Proto-40 is a high quality prototype board, complete with solder masks on both sides of the board, plated holes along with a high-contrast silk-screen labeling component positions. Board size is a compact 3 5/8" x 5" (9.2cm x 12.7cm) ready to fit into standard size project cases such as the Radio Shack ABS plastic project case (270-1806 or 270-1807).

A complete data sheet for the Proto-40 is available in PDF format along with the schematic.

Proto-24
BasicStamp / BasicX-24 Prototype

Board Partially Assembled The Proto-24 is a general-purpose prototyping platform used with single-chip embedded processors such as the NetMedia BasicX-24 and Parallax BASIC Stamp 24-pin devices (BASICStamp 2, Stamp 2e Stamp 2sx and Stamp 2SX Plus). Included on board is a full peripheral set including an on board DB-09 connector, regulated power supply and reset circuitry, and over 800 plated-through holes on the prototype surface.

The Proto-24 is a high quality prototype board, complete with solder masks on both sides of the board, plated holes along with a high-contrast silk-screen labeling component positions. Board size is a compact 3 5/8" x 5" (9.2cm x 12.7cm) ready to fit into standard size project cases such as the Radio Shack ABS plastic project case (270-1806 or 270-1807).

A complete data sheet for the product is available in PDF format along with the schematic.

Proto-18 Kit PICmicro
Prototype Board & Parts

The Proto-18 is a general-purpose prototyping platform to evaluate Microchip PIC based microcontroller products. Supported devices include most of the Microchip 18-pin devices including the PIC 16F88, 16F84, 16F627, 16F628, 16F648, 16F819 and others. Included on board is a full peripheral set including a header for in-circuit programming of flash devices, true RS-232C serial input/output with mounting for an on board DB-09 connector, regulated power supply and reset circuitry, and over 825 plated-through holes on the prototype surface.

The Proto-18 is a high quality prototype board, complete with solder masks on both sides of the board, plated holes along with a high-contrast silk-screen labeling component positions. Board size is a compact 3 5/8" x 5" (9.2cm x 12.7cm) ready to fit into standard size project cases such as the Radio Shack ABS plastic project case (270-1806 or 270-1807).

A complete data sheet for the product is available in PDF format along with the schematic.

Availability: 20 18 17

Proto-28 Kit PICmicro
Prototype Board & Parts

The Proto-28 is a general-purpose prototyping platform to evaluate Microchip PIC based microcontroller products. Supported devices include most of the Microchip 28-pin devices including the PIC 16F72, 16F76, 16F870, 16F871, 16F872, 16F873, 16F876, 18F242, 18F252, 18F442, 18F452 and others. Included on board is a full peripheral set including a header for in-circuit programming of flash devices, true RS-232C serial input/output with mounting for an on board DB-09 connector, regulated power supply and reset circuitry, and over 740 plated-through holes on the prototype surface.

The Proto-28 is a high quality prototype board, complete with solder masks on both sides of the board, plated holes along with a high-contrast silk-screen labeling component positions. Board size is a compact 3 5/8" x 5" (9.2cm x 12.7cm) ready to fit into standard size project cases such as the Radio Shack ABS plastic project case (270-1806 or 270-1807).

A complete data sheet for the product is available in PDF format along with the schematic.

Availability: 21 17