Water Resistant LED Light Strip

Yellow – 5M

As part of our shop clean-up, we have various odd-n-ends that we are offering at clear out pricing.
Stock is extremely limited normally to one single piece.

Frequently Asked Questions:

• Can I Run This On a 9v Battery: The LED strip will run on DC voltages from 9v to 14v. It will run with a 9v battery but the intensity will not be as bright. It is suggested that you run shorter lengths of the LED ribbon to conserve battery life. Operation on a 12v battery such as a car battery are totally fine.
• Can I Use This With a Wall Adapter for Power: Yes, a DC wall adapter will run the LED display just fine (see our power adapter here). Keep in mind that the current draw for 5m is approximately 2A (2000mA), so ensure your adapter can supply 12v at 2A. Because the ribbon is can be trimmed in shorter lengths, you can customize the length and power requirements. The ribbon can be trimmed every 5cm (1.97”) which gives you three LEDs – the current draw for three LEDs is only 20mA, so if you wanted a shorter length, you can trim the ribbon down in size. If you were to customize a length to say 20cm, this would have 12 LEDs and would draw only 80mA of current at 12v.
• Will This Work In My Car/Truck/Motorhome or Trailer: Yes, the LED ribbon is fantastic for use in mobile applications. Because they run on 12v and draw very little current, they are absolutely great substitutes for standard lighting applications. Remember the LED Ribbon also have an adhesive backing on them to aid in mounting, such as under-counter, stairways, walkways, etc.