CR2032 Battery Holder Board

Kit of Parts – Ready for Assembly (or Available Fully Assembled)

This battery holder is by far the easiest way to add a single battery to a small design and includes a bonus power switch. This battery holder uses one Lithium CR2032 (20mm diameter, 3.2mm thick) sized coin cell resulting in 3v DC output. Lithium coin cells are not rechargeable, but they are inexpensive and very easy to find.

Perfect for soldering into a circuit or inserting the leads into a breadboard. Ideal for electronics projects, restorations, robotic designs, cosplay costume, or driving LEDs.

This small board measures only 38mm x 30mm (1.5" x 1.2").

This is the full kit of parts which you assemble (it is also available fully assembled). The bare board is also available if you would like to supply the components, see the CR2032 Battery Box PC board.

Parts Included In The Kit

Dimensions

The Battery Box PC board measures only 38mm x 30mm (1.5" x 1.2").

CR2032 Battery Holder Board Dimensions

Battery Box Built-In Options

Switchless Operation Jumper

There may be installation requirements where you would prefer not to install a switch on board. If this option is desired, there are a pair of solder pads on the back of the board. Simply solder-bridge the two pads and this will eliminate the need for a switch and will result in unit always operating in the on mode.

CR2032 Battery Holder Board Option Block

Onboard LED Indicator

For applications where you would like to run an LED with the controller, there is a set of pads on the board specifically for this. The mounting position is labeled LED. The LED is powered when either the switches are turned on or if there is a jumper placed across the Switchless Operation jumper.

CR2032 Battery Holder Board LED Mounting Option

Examples of Assembled Board

CR2032 Battery Holder Switch Options

The board features the ability to mount three different models of switches. This shows the Top Mounted, Side Mounted, and Push Button switch options. 

CR2032 Battery Holder Board with Switch Options Example

 

Correct Installation Of Push Button

Correct Installation Of Push Buttom

When installing the push button, it is essential to position the switch, so the notch faces the side of the board as shown in the image. If the push button installation is reversed, the button will be active when it is in the up position and not the down position as most would expect.

Please Note: CR2032 Battery is not included. See our CR2032 3V Lithium Battery if required.

Packaged Individually.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

CR2032 Battery Holder with Switch

Kit or Fully Assembled
  • Product Code: CR2032 Holder with Switch Kit
  • Availability: In Stock
  • $1.55 USD


  • 2 or more $1.50 USD
  • 5 or more $1.45 USD
  • 10 or more $1.35 USD

Available Options


Related Products

CR2032 3V Lithium Button Cell Battery

CR2032 3V Lithium Button Cell Battery

Package of 5 Pieces

CR2032 3V Lithium Button Cell Battery Frequent Uses: LED projects, LED lighting, watches, cal..

$1.95 USD

CR2032 PCB Mount Battery Holder

CR2032 PCB Mount Battery Holder

PCB Thru-Hole

CR2032 PCB Mount Battery Holder   CR2032 battery button cell holder socket suitable fo..

$0.45 USD

8 AA Battery Holder

8 AA Battery Holder

Produces 12v DC Output

Battery holder for eight AA cells arranged as two back-to-back four-cell holders. When you need a po..

$1.60 USD

3 AA Battery Holder

3 AA Battery Holder

Open Frame Style

The 3 x AA Battery Holder puts a nice finishing touch on your battery powered project. This holder i..

$1.15 USD

CR2016 3V Lithium Button Cell Battery

CR2016 3V Lithium Button Cell Battery

Package of 5 Pieces

CR2016 3V Lithium Button Cell Battery Frequent Uses: LED projects, LED lighting, watches, cal..

$1.95 USD

CR2032 Battery Holder with On/Off Switch (discontinued)

CR2032 Battery Holder with On/Off Switch (discontinued)

Kit or Fully Assembled - Discontinued

CR2032 Battery Holder with Switch Available as Bare Board, Kit or Fully Assembled This unit ha..

$1.95 USD

CR2032 Battery Holder Bare Board

CR2032 Battery Holder Bare Board

Bare PC Board Only

CR2032 Battery Holder Board Bare Board – Ready for Assembly This battery holder is by far the ..

$0.95 USD

CR2025 3V Lithium Button Cell Battery

CR2025 3V Lithium Button Cell Battery

Package of 5 Pieces

CR2025 3V Lithium Button Cell Battery Frequent Uses: LED projects, LED lighting, watches,..

$1.95 USD

CR2032 Battery Holder Bare Board (discontinued)

CR2032 Battery Holder Bare Board (discontinued)

Bare PC - Discontinued

CR2032 Battery Holder Board - Discontinued Bare Board – Ready for Assembly - Discontinued This..

$1.20 USD

Tags: cr2032, button cell holder, battery holder, on/off switch, dual 2032 with