Your shopping cart is empty!
COVID-19 Update: Our online sales are continuing for our Canadian, US and many International customers. Package deliveries are being slightly delayed in transit but are still arriving. Orders are shipped the next business day after they are received. Contact Us for any questions.
WS2801 RGB Pixel displays are digitally-controllable LED lights which can be set to any color, or animated. Each display contains an RGB LED along with a dedicated WS2801 controller chip. We have models that are weatherproof and sealed in clear silicon casing and others that are open-frame. The weatherproof models feature flanges molded in so that you can 'push' them into a 12mm drill holes in materials up to 1.5mm/0.06" thick.
The RGB pixel is connected by a 4-conductor cable. Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end. The four connection wires carry the following signals: +5V , Gnd , Data and Clock .
Pixels are digitally controlled, with an internal 8-bit PWM LED driver (24-bit color for 16 million different shades). Pixels must be clocked by a microcontroller, or other control devices. There are many examples around the web available showing simple connections and code for the Arduino as well as other microcontrollers.
Each pixel contains an 8mm diffused (frosted) RGB LED, with a 120 degree beam width. Brightness of the display for each color is approximately Red = 3.3 Lumens/300 mcd, Green = 10 Lumens/1000 mcd, Blue = 2.7 Lumens/300 mcd (mcd calculation based on full 120 degree beam) for a total of approximately 1600mcd and due to the diffused frosting design of the LED light is evenly distributed.
The pixel displays are sold in strands of 50 pixels with a JST SM 3-pin connector on each end allowing you to chain modules together. Each strand also has additional power connection wires to allow for power modules separately and not trying drawing power through the whole chain.
A complete datasheet with specifications on the WS2801 driver chip is also available.
0 reviews / Write a review
The latest in LED lighting is here, and it’s amazing. Each meter of the LED ribbon contains 32 ultra..
$6.95 USD $19.95 USD
Flat WS2801 Pixel - Insulated
WS2801 Flat-Pack RGB Pixel displays are digitally-controllable LED li..
WS2801 Flat-Pack RGB Pixel displays are digitally-controllable LED lights which can be set to any co..
Flat WS2801 Pixel
WS2801 Flat-Pack RGB Pixel displays are digitally-controllable LED lights which c..
$0.35 USD $1.50 USD
Controller allows for DMX or stand-alone control of HL1606 based LED Ribbons. Allows for full contro..
modules bullet-pixel-insul-50 based