• Proto-24 BasicStamp Prototype Board

Proto-24

BASIC Stamp 2 Prototyping Board

The Proto-24 is a general-purpose prototyping platform used with single chip embedded processors such as the NetMedia BasicX-24™ and the Parallax BASIC Stamp® 24-pin devices (BASIC Stamp 2, Stamp 2e Stamp 2sx and Stamp 2SX Plus). Included onboard is a regulated power supply, DB-9 connector for attaching to a host computer system, reset circuitry and over 800 plated-through holes on the prototype surface.

The Proto-24 is a high quality, double sided, glass epoxy PC board, complete with solder masks on both sides of the board and plated holes along with a high-contrast silk-screen labeling component positions. Board size is a compact 3 5/8" x 5" (920mm x 1270mm) ready to fit into standard size project cases such as the Radio Shack ABS plastic project case (270-1806).

Designed for the experimenter, the Proto-24 Prototyping board provides a large area for user-designed prototypes, using wire-wrap or point-to-point wiring. All connections are routed to individual wire-wrap points.

For more information and technical details on the Proto-24, please visit our Support Site.

This item includes the bare board only. No components are included.

Components Needed To Complete This Kit


PC Board
(1) Proto-24 PC Board with detailed instructions

Resistors 1/4 watt, 5% Carbon Film:
(1) 220-ohm

Capacitors:
(1) 100uF 35v
(1) 10uF 25v
(1) .1uF

Semiconductors:
(1) LM7805 – 5 volt regulator TO-220 Case
(1) 1N4002
(1) Red LED Power Indicator

Sockets, Headers, Connectors and Switches:
(1) 24-pin DIP Socket
(1) 2.1mm or 2.5mm Coaxial Jack PCB
(1) 1x2-pin male header
(1) 1x3-pin male header
(2) 2-pin Jumper – Push On
(1) PCB mount pushbutton switch
(1) DB9 Female PCB right angle connector

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Proto-24 BasicStamp Prototype Board

BASICStamp 2 Prototyping Board
  • Product Code: PROTO24
  • Availability: In Stock
  • $9.95 USD
  • $1.95 USD


Related Products

LED Blinky Kit DIY LED Flasher

LED Blinky Kit DIY LED Flasher

Available in Different Colors

LED Blinky Kit The LED Blinky dual LED flasher is one of our simplest projects ever, can be assemb..

$5.00 USD

LED fX - Kit With Parts

LED fX - Kit With Parts

Do-It-Yourself Kit

The LED fX is an extremely simple and effective design - specifically engineered to control 16 indiv..

$14.95 USD

LED fX PC Board

LED fX PC Board

You Supply All The Parts

LED fX LED Lighting Effects Controller - Bare Board The LED fX is an extremely simple and eff..

$6.00 USD

Proto-40 Prototype Board

Proto-40 Prototype Board

Bare Board - You Supply Components

Proto-40 40-Pin PIC Micro Prototyping Board The Proto-40 is a general-purpose prototyping plat..

$4.95 USD $9.95 USD

LED Dazzler Controller

LED Dazzler Controller

The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. Using minim..

$12.00 USD

LED Dazzler Bare PCB

LED Dazzler Bare PCB

The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. Using minim..

$4.00 USD

Tags: proto-24, prototype, board, (basicstamp), specials proto24 boards