The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. Using minimal components, the LED Dazzler controls LED ribbons, at 5 volts, of any size up to and beyond 5m (16+ feet) or more, producing a full color halo in stunning display patterns and sequences.

The LED Dazzler is available fully assembled, as a kit you can build, or just the bare board allowing you to supply your own components. Assembly of the kit in less than 15 minutes is possible. The board is a high quality, double-sided design, complete with solder masks on both sides, plated holes along with a high-contrast silk-screen labeling component positions measuring only 2.5" x 1.4" (64mm x 36mm).

Power input and connection to the LED Ribbon is through high-quality rising clamp terminal blocks which simplify connections to the board or optionally soldering directly to the PCB.

The processor used on the LED Dazzler is a PICAXE-08M processor, and comes shipped preprogrammed from us when you purchase a fully assembled system or a kit of parts. If you have a PICAXE Programmer, you can easily customize the displays and sequences of the included processor or use your own processors.

For more information and technical details on the LED Dazzler, please visit our Support Site.


Kit Includes

PC Board
(1) LED Dazzler PCB

(1) .1uF Capacitor
(1) .47uF Capacitor
(1) 33uF 50v Electrolytic Capacitor

Sockets, Headers, Connectors and Switches:
(1) 8-pin DIP Socket
(1) Rising Clamp Terminal Block (4 Position)
(1) Rising Clamp Terminal Block (6 Position)
(1) 9v Battery Connector

(1) LED Dazzler PICAXE-08M Processor (Preprogrammed)
(1) LM2940CT-5.0-ND TO-220 Case

HL1606 LED Ribbon:
(1) 1-meter Lenght of HL1606 Ribbon

Note: This is the full kit and INCLUDES a 1m length of the HL1606 LED Ribbon

The LED Dazzler is offered as a stand-alone unit without a HL1606 compatible LED Ribbon or with various length options. If you will be running your LED Dazzler from a battery supper (or using the included regulator), we highly recommend using lengths of up to 1m in lengths. Longer lengths will draw more current through the regulator and increase its operating temperature. For lengths longer than 1m, our recommendation is to use the regulated 5v power supply input option to the board.

We have also prepared a detailed user guide and construction manual available in PDF format.

Please note: The LED Dazzler is available either as a Kit or Fully Assembled and tested. The Kit contains all of the parts listed ready for you to assemble. The Fully Assembled version pre-configured for 12v also includes all components but is fully assembled and tested while the pre-configured 5v version is fully assembled, it does not include regulator U1, capacitors C2 and C3, nor the battery clip J1.

Reviews about LED Dazzler Controller Kit
Average rating: 0 reviews
Total reviews: 0
Write your own review on this product.
Write a review
Sort by:

Write a review

Please login or register to review

LED Dazzler Controller Kit

  • With 1m HL1606 Ribbon

  • Product Code: LED Dazzler + Ribbon
  • Availability: In Stock
  • $31.95 USD
  • $19.95 USD

Related Products

HL1606 Digital Addressable RGB LED Flexible Strip

HL1606 Digital Addressable RGB LED Flexible Strip

 1m - 39.4inch Length

$19.95 USD $6.95 USD

HL1606 Digital Addressable RGB LED Flexible Strip
Flexible Ribbon LED Light Strip 1M

LED Light Strip Flex Ribbon

 1m - 39.4" Length

$5.99 USD $4.00 USD

Yellow Water Resistant LED Light Strip 5M

Yellow 5m LED Light Strip

 12v - 14v DC

$50.00 USD $7.95 USD

Tags: led, dazzler, controller, stand-alone:, hl1606, based black, friday, specials with, ribbon kit blk-led