Your shopping cart is empty!
The LED Rainbow is a dedicated Pulse Width Modulation (PWM) controller which generates color changing effects with RGB LED lighting products. The circuit controls three outputs, each which has the ability to run an LED segment, and with three segments, is a natural for the control of RGB LED arrays. The system was updated in May of 2010 to version 3.0 and now features a power indicator along with professional grade rising clamp terminal blocks allowing for solder-free connections to be made to the board for power inputs and signal outputs.
Sequences are fully customizable and are contained in the microcontroller, which has the ability to strobe, cycle and fade the lighting, creating a massive palette of over 16 million colors using Pulse Width Modulation (PWM) technology. Each output has a resolution of 8-bits, which gives each color a range of 256 intensities and when the three colors are mixed together, a full rainbow of color combinations is possible.
With a minimal parts count, the LED Rainbow is very economical for the hobbyist to build, using industry standard components and running off of a standard 12v-15v power supply. The 2" (51mm) square board is a double sided construction with a detailed silk-screen which aids in the placement of the components.
The output of the LED Rainbow can be connected to accessory boards such as our LED TriLight, which holds nine 5mm or Piranha LEDs in a strip, our LED MR16 which holds nine 5mm or Piranha LEDs on a circular board, or our LED MR16RGB which holds four RGB Piranha LEDs in a circular pattern – each available separately.
For more information and technical details on the LED Rainbow, please visit our Support Site.
(1) LED Rainbow PCB with detailed instructions
Resistors 1/4 watt, 5% Carbon Film:
(5) 1K-ohm (brown-black-red-gold)
(1) 33uF 50v Electrolytic Capacitor
(1) .1uF Capacitor
(1) 1N4002 Diode
(1) Red LED (Power Indicator)
(1) LM78L05 Regulator in TO92 Case
(1) LED Rainbow Processor
(3) STP36NF06 N-Channel MOSFETs
Sockets, Headers, Connectors and Switches:
(1) 8-pin DIP Socket
(1) PCB Mount Pushbutton Switch
(3) Rising Clamp Terminal Blocks
Note: Although the images show an extra pushbutton switch at position S2 and power jack at P1, these are are optional and not needed to operate the system. They are shown only to aid in understanding the full options available on system.
This item is only the bare PCB, no components are included.
1 reviews / Write a review
STP36NF06 MOSFET N-Channel
Family: MOSFETs, GaNFETs - Single
FET Type: MOSFET ..
LED Rainbow Processor
v3 Effects Routines
The LED Rainbow is a dedicated Pulse Width Modulatio..
4 LED RGB Display
Holds 4 RGB Piranha LEDs
Note: This item is no longer available. It has been..
4 LED RGB Display Board
Holds 4 RGB Piranha LEDs
Note: This item is no longer available. It ha..
LED Rainbow Kit
All Parts Needed To Build The Kit Yourself
The LED Rainbow is a dedicated Pulse Wi..
The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. Using minim..
The LM2940-N/LM2940C positive voltage regulator features the ability to source 1A of output current ..
LM317T Adjustable Voltage Regulator
Output Voltage Range: 1.2 - 37v
8 Channel Relay Module for Microcontrollers
Eight independent optically isolated inputs connect d..
$9.95 USD $11.95 USD
Assembled and Tested
The LED Rainbow is a dedicated Pulse Width Modulation (PWM) c..