LED fX

LED Lighting Effects Controller - Bare Board

LED fX Displaying Sequence 23 The LED fX is an extremely simple and effective design - specifically engineered to control 16 individual output ports. Each port has an LED attached to it, allowing for attractive effects to be achieved by running customized code on the built-in PIC processor.

The unique design allows for the selection of various lights effects stored on the processor by selecting a routine from the onboard DIP switch. The processor will run the built-in routine selected and display the output on the LEDs.

The outputs are buffered through a ULN2803 8-bit TTL-Input NPN Darlington sink driver – which allows for the control of high-current devices from a single processor pin. Each Darlington can handle a maximum of 500mA of continuous current at a maximum of 50V – making the ULN2803 well suited to provide an interface between the low logic levels of the processor to higher current/voltage devices such as relays, solenoids, motors, lamps, LEDs and other devices.

Full construction information is available for download.

See all of the internally included animation effects included on the board when used with our effects chip.

For more information and technical details on the LED fX, please visit our Support Site.

 

You will need the following items to complete your LED fX system

 

PC Board
(1) LED fX assembled and tested with detailed instructions

Resistors 1/2 watt, 5% Carbon Film:
(16) 510-ohm (green-brown-brown-gold)

Resistor Pack:
(1) 10K-ohm (10-Pin, 9 Resistors SIP resistor pack)

Capacitors:
(1) 100uF 35v Electrolytic Capacitor
(1) 10uF 25v Electrolytic Capacitor
(2) 15pF Capacitor
(3) .1uF Capacitor

Semiconductors:
(8) Blue LEDs
(8) White LEDs
(1) 1N4002 Diode
(1) LM7805 Regulator in TO220 Case
(1) LED fX Processor
(2) ULN2803A Octal Peripheral Driver

Crystal:
(1) 4Mhz Crystal HC49 Case

Sockets, Headers, Connectors and Switches:
(1) DIP Switch – 10 Position
(1) 28-pin DIP Socket
(2) 18-pin DIP Socket
(1) 1x3-pin male header
(1) 2-pin Jumper – Push On
(1) DC Power Coaxial Jack PCB

Power Adapter
(1) 110v AC to 12v DC Power Adapter

 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

LED fX PC Board

You Supply All The Parts
  • Product Code: LEDfXPCB
  • Availability: In Stock
  • $6.00 USD


Related Products

Proto-24 BasicStamp Prototype Board

Proto-24 BasicStamp Prototype Board

BASICStamp 2 Prototyping Board

Proto-24 BASIC Stamp 2 Prototyping Board The Proto-24 is a general-purpose prototyping platfor..

$1.95 USD $9.95 USD

LED fX - Kit With Parts

LED fX - Kit With Parts

Do-It-Yourself Kit

The LED fX is an extremely simple and effective design - specifically engineered to control 16 indiv..

$14.95 USD

LED Rainbow Processor

LED Rainbow Processor

LED Rainbow v3 Processor

LED Rainbow Processor v3 Effects Routines The LED Rainbow is a dedicated Pulse Width Modulatio..

$5.00 USD

LED Dazzler v1 Processor

LED Dazzler v1 Processor

The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. This is ..

$5.00 USD

Proto-40 Prototype Board

Proto-40 Prototype Board

Bare Board - You Supply Components

Proto-40 40-Pin PIC Micro Prototyping Board The Proto-40 is a general-purpose prototyping plat..

$4.95 USD $9.95 USD

ULN2065B

ULN2065B

Quad Darlington 1.5Amp Switch

Features - Output current to 1.5 A for each Darlington - Minimum breakdown 80 V - Sustain..

$3.25 USD

ULN2003A

ULN2003A

Darlington Transistor Array

Features - 500-mA-Rated Collector Current (Single Output) - High-Voltage Outputs: 50 V - Ou..

$0.65 USD

Tags: led, board, blank, project, pcbs ledfxpcb