Your shopping cart is empty!
Water flow sensor consists of a plastic valve body, a water rotor, and a hall effect sensor - when water flows through, the internal rotator will change its speed with different rate of flow and hall effect sensor outputs the corresponding pulse signal. Use with laser cutters or CNC to measure if and how much water is flowing through laser tube or CNC spindle for cooling.
Working Voltage: DC 5V~24V
Maximum Working Current: 15mA @ 5V DC
Flow Rate Range: 1~30L/min
Threads: External 1/2"
Connection: Threads External 1/2"
Inlet Water Pipe Diameter: 2.5-4mm
Load Capacity: ≤10mA (DC 5V)
Operating Temperature: ≤80℃
Liquid Temperature: ≤120℃
Operating Humidity: 35%～90%RH
Water Pressure: ≤1.75MPa
Storage Temperature: -25～+ 80℃
Storage Humidity: 25%～95%RH
Red: Power In
Yellow: Signal Output
Available for download.
0 reviews / Write a review
Raspberry Pi GPIO Extension Board
with Ribbon Cable
Raspberry Pi dedicated GPIO adapter with 3..
$0.95 USD $4.95 USD
PL-05N Inductive Proximity Sensor
5mm NPN Output 10-30v
Inductive Proximity Sensor PL-05N NPN&..
The DHT22 is a accurate digital temperature and humidity sensor. It uses a capacitive humidity senso..
Widely used for temperature control or protection for household electric appliances. It is open unti..
cnc sensors yf-s201 (black)