4-Channel Level Converter

Bi-Directional 3.3V/5.0V Converter

If you have ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.

The level converter is straightforward to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the "HV" pin, low voltage (3.3V for example) to "LV", and ground from the system to the "GND" pin.

These are 4 Channel devices (works great for I2C or SPI) and will work with all microcontrollers, Arduino, Raspberry Pi, Intel Edison, etc. Use this module to connect two devices of different digital voltage levels. For example: connecting an Arduino (5V device) to an ESP8266 (3.3V device).

The Level Converter comes complete with header pins and can be used directly on a breadboard.

Product Contents:

  • 1 x 4-Channel Bi-Directional Logic Level Converter
  • 2 x 1x6 male headers

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

4-Channel Level Converter

Bi-Directional 3.3V/5.0V Converter
  • Product Code: 4-Channel Logic Level Converter
  • Availability: In Stock
  • $0.95 USD


Related Products

Arduino Uno R3 (Wavgat)

Arduino Uno R3 (Wavgat)

Complete With USB Cable

Arduino Uno R3 by Wavgat Arduino Uno R3 Compatible Arduino Uno R3 is a microcontroller board b..

$7.95 USD $9.95 USD

Tags: logic, level