EDG Pluggable Terminal Blocks – 3.81 mm & 5.08 mm

Order common EDG Euroblock variant: choose female pluggable terminal block (plug) or male PCB header (available in straight or right‑angle orientations), in 3.81 mm or 5.08 mm pitch and 2, 3, 4, 5 or 7‑pin configurations.

The removable plug makes servicing fast and reliable, while the PCB header provides a robust mating interface for power, control, and signal wiring.

Features

• Two standard pitches: 3.81 mm and 5.08 mm
• Pin options: 2, 3, 4, 5 and 7‑position
• Female plug with rising‑clamp screw terminals for secure wire retention
• Male PCB headers in straight or right‑angle orientations
• Modular, pluggable design for easy field service and fast assembly
• Suitable for power, control, and signal interconnects on compact PCBs

Specifications

• System type: EDG (Euroblock‑style) pluggable terminal block
• Pitch options: 3.81 mm, 5.08 mm
• Positions: 2 / 3 / 4 / 5 / 7
• Wire type: Solid or stranded (typ. 22–16 AWG depending on pitch/series)
• Mating: Female plug ↔ Male PCB header (same pitch & pin count)
• Header orientations: Straight (vertical) or Right‑Angle (horizontal/side‑entry)
• Housing: Flame‑retardant thermoplastic (colour: green) — typical for Euroblock systems
• Termination: Screw‑clamp (plug), solder‑pin (header)

Notes

• In EDG systems, the female part is the “plug” (pluggable terminal block). The PCB‑mounted part with exposed pins is the male header.
• Order the plug and header separately. Be sure to match pitch and pin count.