I2C IIC Serial Interface Module
I2C IIC Serial Interface Board Module - Address Changeable - For Arduino
This is a great IIC/I2C Serial Interface. As the pin resources for Arduino controller is limited, your project may be not able to use normal LCD shield after connected with many sensors or interfaces. With this I2C interface module, you will be able to realize data display via only 2 wires. Fantastic for Arduino based project.
- Dimensions: 41.5mm * 19mm* 15.3mm
- With backlight power control, you can set the backlight power supply is connected by a jumper.
- Plug jumper to connect backlight power supply.
- Unplug the jumper to disconnect the backlight power
- Contrast can be adjusted by adjusting the blue potentiometer. Potentiometer design on the front, enabling adjustment anytime
- Modules can be cascaded up to cascade 8. Modify the device address via a short circuit A0/A1/A2. Default address is 0x27.
- Color: Black
1 x IIC I2C Serial Interface Board Module