High Power PWM LED Driver Board

Driver for 1 watt or 3 watt High Power LEDs

What Is An LED Driver?

A LED driver is an electrical device which regulates power to an LED or a string of LEDs. Using one is very important in preventing damage to your LEDs. The forward voltage (Vf) of a high-power LED changes with temperature. Forward Voltage is the voltage the LED requires to light up. As the temperature increases, the forward voltage of the LED decreases. This causes the LED to draw more current. The LED will continue to get hotter and draw more current until the LED burns itself out. This is also known as Thermal Runaway.

A LED driver acts as a power controller with outputs matched to the electrical characteristics of the LED(s). This helps avoid thermal runaway. The LED driver compensates for changes in forward voltage while delivering a constant current to the LED.

Our High Power PWM LED Driver Board

The driver board is compatible with 1 watt and 3 watt high power LED drivers. The board has provisions for up to 3 drivers. The drivers can be either all 1 watt or all 3 watt, or a mixture as needed.

Each driver can run up to four high power LEDs, but is dependent on your supply voltage. You can usually run three LEDs on each output from a minimum 12v power supply.

Bare Board

This items is the bare board only, allowing you to build up a system with your own parts as needed. We also offer the driver board as a full kit of components.

Components Needed

 

Connection Details

Connecting your board is straight forward. Only one power source is needed to drive the whole board. More details on the driver board can be found on our support site. Details on the basic connection and also connection to devices like microcontrollers and the Arduino

Connection details of the high power LED driver board

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

High Power LED Driver Board

DIY Bare Board Only
  • Product Code: Driver Board Bare (High Power)
  • Availability: In Stock
  • $9.95 USD


Related Products

Rising Clamp Terminal Block - 3 Position

Rising Clamp Terminal Block - 3 Position

PCB mount, straight rising clamp  Pitch (Between Pins): 0.300" (7.62mm) Positions: 03&nb..

$0.49 USD

1W High Power PWM LED Driver

1W High Power PWM LED Driver

PWM Constant Current Driver

1W High Power PWM LED Driver LED drivers can be a confusing part of LED technology. There are man..

$5.50 USD

3W High Power PWM LED Driver

3W High Power PWM LED Driver

PWM Constant Current Driver

3W High Power PWM LED Driver LED drivers can be a confusing part of LED technology. There are man..

$5.50 USD

1 or 3 watt LED Driver Kit

1 or 3 watt LED Driver Kit

DIY Kit - All Parts - Easy Assembly

High Power PWM LED Driver Kit Driver Kit for 1 watt or 3 watt High Power LEDs What Is An LED D..

$19.95 USD $29.15 USD

Tags: high power led, led driver