These surface-mount LEDs are an easy way to add a lot of colorful dots to your project. They're similar to the ones in our digital RGB LED strip, same size and shape. They are half a centimeter on a side, which makes them small but not so small that they are impossible to hand solder. There are three LEDs inside, red, green and blue and because they are so close together, they mix very nicely, without the need for a diffuser. The LED is also insanely bright, at a eyeball-blistering 3800mcd.

Comes in a strip of 10 pieces. 
Please note this is a surface mount part! It is possible to solder thin wires to the pads but its designed for use on a SMT PCB.

Red Vf: 2.8 to 3.1v (Typical 3.0v)
Green Vf: 3.2 to 3.5V (Typical 3.4v)
Blue Vf: 3.2 to 3.5V (Typical 3.4v)
Red color: 625-630 nm
Green color: 520-530 nm
Blue color: 460-465 nm
Red brightness @ ~20mA: 6000 mcd
Blue brightness @ ~20mA: 7000 mcd
Green brightness @ ~20mA: 9000 mcd
Viewing Angle: 120-140 degree

Package of 10 Pieces
Bulk packaged for larger quantities