NodeMcu Lua v3 with WiFi

Internet of Things Development Board

An open-source firmware and development kit that helps you to prototype your IoT product within a few Lua script lines.

NodeMcu is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term "NodeMCU" by default refers to the firmware rather than the dev kits. The firmware uses the Lua scripting language. It is based on the eLua project, and built on the Espressif Non-OS SDK for ESP8266.

  • Built-in on-board USB-TTL serial converter based on CH340G, with Micro-USB socket
  • Power in for DC 4~9V DC to pin VIN
  • Pin headers 2.54mm (0.1") 15 pins x 2 rows
  • Arduino-like hardware I/O and can program in Arduino IDE
  • Event-driven API for network applications
  • 10 GPIOs D0-D10, PWM functionality, IIC and SPI communicaiton, 1-Wire and ADC A0 etc. all in one board
  • Wifi networking (can be uses as access point and/or station, host a webserver), connect to internet to fetch or upload data

The board combines features of WiFi accesspoint and station plus microcontroller and uses simple Lua based programming language. 

Arduino-like hardware IO

Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware. Code like arduino, but interactively in Lua script.

Nodejs style network API

Event-driven API for network applicaitons, which faciliates developers writing code running on a 5mm*5mm sized MCU in Nodejs style. Greatly speed up your IoT application developing process.

Lowest cost WI-FI

WI-FI MCU ESP8266 integrated and easy to prototyping development kit. The best platform for IoT application development at the lowest cost.

Usage Notes:

The ESP8266 uses a lot of current, so if you're getting flakey behavior make sure you are plugging your console cable into either a motherboard USB port or a powered USB hub. Don't use the 'extra' USB port on your monitor or keyboard.

Expansion

Recommended for use with our NodeMcu Development Board platform

 

NodeMcu in Expansion Board

 

External Resources:

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

NodeMcu Lua v3 with WiFi

IoT Development Board
  • Product Code: NodeMcu v3 IoT
  • Availability: In Stock
  • $7.95 USD


Related Products

Development Board for ESP8266 Node MCU

Development Board for ESP8266 Node MCU

for ESP8266 Processor

Node MCU Development Board for ESP8266 v3 Module For Use With NodeMCU LUA v3 Development board..

$6.95 USD

Nano v3 ATMega328 with Micro USB

Nano v3 ATMega328 with Micro USB

Arduino Nano Compatible

Arduino Nano v3 Compatible ATmega328 with CH340G and MicroUSB This Arduino Nano compatible mo..

$5.45 USD $6.95 USD

NodeM ESP8266 with CH340G USB

NodeM ESP8266 with CH340G USB

32Mb Memory

WiFi NodeM ESP8266, 32M flash, CH340G Internet of Things Development Board This product has be..

$9.95 USD

4 Port USB Hub with On/Off Switches

4 Port USB Hub with On/Off Switches

with On/Off Switches

4 Port USB Hub with On/Off Switches This USB 2.0 hub supports up to four devices; each port fe..

$3.95 USD

Tags: NodeMCU Lua WiFi Internet of Things