Purple Flexible Ribbon LED Strip 12V

1M Length with 120 2835 LEDs 

Designed for the average homeowner as well as lighting professionals, flexible LED strips can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting, in campers and trailers for low-cost high-efficiency lighting, in cars for accent lighting, in your firearms or gun safe to light up your possessions – the possibilities are endless. They are a cool and efficient way to decorate tables, TV rooms, display cases, and closets. They can also function as eye-catching special effects at stores and expo booths. The strips feature an adhesive backing allowing for self-adhesion to non-porous surfaces.

Each length of 1m (39.4-inch) contains 120 LEDs.

Specifications

• LED Quantity/Type: 600 x High Brightness SMD2835 (120 LEDs per Meter)
• Backing: Adhesive Tape
• Ribbon Width: 8mm (0.315inch)
• Length: 1m (39.4-inch)
• Input Voltage: 12V DC
• Power (max): 4.8W (0.4A)
• Beam Angle: 120º
• LED Color: Purple 
• PCB Color: White
• Minimum bending radius: 5cm (2")
• Continuous length should not exceed 16.4ft (5m); additional lengths should be wired in parallel

Creating A Custom Length of LED Strip:

Need a custom length of ribbon? Each ribbon can be trimmed to custom lengths in 2.5cm (0.98") increments. Simply cut the ribbon on the scissor markings and re-solder power wires to the end copper connections (you only need to apply power to one end of the ribbon). 

Frequently Asked Questions:

• Can I Run This On a 9v Battery: The LED strip will run on DC voltages from 9v to 14v. It will run with a 9v battery but the intensity will not be as bright. It is suggested that you run shorter lengths of the LED ribbon to conserve battery life. Operation on a 12v battery such as a car battery are totally fine.
• Can I Use This With a Wall Adapter for Power: Yes, a DC wall adapter will run the LED display just fine (see our power adapter here). Keep in mind that the current draw for 5m is approximately 2A (2000mA), so ensure your adapter can supply 12v at 2A. Because the ribbon can be trimmed in shorter lengths, you can customize the length and power requirements. The ribbon can be trimmed every 2.5cm (0.98”) which gives you three LEDs – the current draw for three LEDs is only 20mA, so if you want a shorter length, you can trim the ribbon down in size. If you were to customize a length to say 20cm, this would have 24 LEDs and would draw only 160mA of current at 12v.
• Can I Use The LED Ribbon Outdoors: You can use this outdoors, but keep in mind that the ribbon has not been waterproofed, so you will have to provide protection for it, such as inside a tube if it is in contact with dampness.
• Will This Work In My Car/Truck/Motorhome or Trailer: Yes, the LED ribbon is fantastic for use in mobile applications. Because they run on 12v and draw very little current, they are absolutely great substitutes for standard lighting applications. Remember the LED Ribbon also have an adhesive backing on them to aid in mounting, such as under-counter, stairways, walkways, etc.