Cameo Silhouette CB09 Blades - Set of 5

Available in 30, 45, or 60 Degree Styles with Springs

These replacement blades require a CB09 Blade Holder, available separately

The CB09 blade holder and blade is a common cutter combination used with Graphtec vinyl cutters - and it also happens to fit well into the Cameo Silhouette line of machines.

The holder allows for easy replacement of only the blade itself, lowering overall costs compared to conventional Silhouette assemblies which are more costly and cannot have their blades replaced. Blades are available in three cutting angles (30, 45, or 60 degree). The range of different cutting angles allows for choosing the most appropriate model based on the material cutting requirements.

The CB09 blades feature a longer-lasting life, better and cleaner cuts, and a much less expensive replacement. The blades are much better for cutting small or intricate text or graphic designs.

These replacement blades require a CB09 Blade Holder, available separately.

To use the blades, they require the CB09 Blade Holder. Be aware - there are several different styles of blade holders available in the market; some will work with the Cameo Silhouette 4 (or other Cameo units), while there are many others available through other sources like Amazon, which are not compatible. Our CB09 holders and blades are fully compatible with the Cameo Silhouette line of machines. See each machine model requirements.

To use the blades, they require the CB09 Blade Holder. Be aware - there are several different styles of blade holders available in the market; some will work with the Cameo Silhouette 4 (or other Cameo units), while there are many others available through other sources like Amazon, which are not compatible. Our CB09 holders and blades are fully compatible with the Cameo Silhouette line of machines. See each machine model requirements.

Each blade also includes a tensioning spring.

Blade selection is based on the materials to be cut:

• 45° Blades: This is the most common and widely used blade. Excellent for use with material up to ~1.5mm and requires average dragging force. Great everyday use blade for day-to-day applications such as regular vinyls, HTV vinyl, and papers. The 45° blade is the most common and widely used blade model.
   
• 30° Blades: This blade has less of a sharp angle and is for material up to ~1mm thick and requires the most dragging force. More of the blade surface is in contact with the material than the 45° or 60° blades. Excellent for rigid materials like fabric, reflective vinyl, and heavy-duty materials like cardboard and leather.
   
• 60° Blades: Have the sharpest tip and most effective cutting edge. The smallest portion of the blade is in contact with the material being cut compared to the other blade angles. Since only a small portion of the blade is in contact with the surface, it will also wear out quicker. It can cut the most intricate designs and delicate cuts and thick material up to approximately 2mm depth. Easily penetrates cutting material and requires the least dragging force. Use with thick materials like HTV glitter, StripFlock and brick, vellum, freezer paper reflective materials, masks, and masking tape. Blade is extremely good at cutting very small fonts and intricate designs.

Each cutting blade has a protective colored sleeve. Sleeves are generally Yellow, Red, or Blue. Sleeve colors are removable and supplied by manufacturers to protect the cutter tip. The sleeve color can vary from batches and should not be used to determine the cutter angle.

Blade Specifications:

• Shank Size: 0.9mm
• Overall Length: 19mm
• Construction: Tungsten Steel Carbide
• Package Size: 5 Blades with Springs

Are you looking for detailed installation and setup instructions for your CB09 Blade Holder and Blades?
Visit our support page for additional information.