DHT22 Digital Temperature and Humidity Sensor

Accurate Digitial Measurements

The DHT22 is an accurate digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and outputs a digital signal on the data pin (no analog input pins needed). It's fairly simple to use a sensor that can deliver new data once every 2 seconds.

Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin, and the rightmost pin to ground.

Technical Details

• Low cost
• 3 to 5V power and I/O
• 2.5mA max current use during conversion (while requesting data)
• Good for 0-100% humidity readings with 2-5% accuracy
• Good for -40 to 80°C temperature readings ±0.5°C accuracy
• No more than 0.5 Hz sampling rate (once every 2 seconds)
• Body size 27mm x 59mm x 13.5mm (1.05" x 2.32" x 0.53")
• 4 pins, 0.1" spacing
• Weight: 2.4g