The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. Using minimal components, the LED Dazzler controls LED ribbons, at 5 volts, of any size up to and beyond 5m (16+ feet) or more, producing a full color halo in stunning display patterns and sequences.

The LED Dazzler is available fully assembled, as a kit you can build, or just the bare board allowing you to supply your own components. Assembly of the kit in less than 15 minutes is possible. The board is a high quality, double-sided design, complete with solder masks on both sides, plated holes along with a high-contrast silk-screen labeling component positions measuring only 2.5" x 1.4" (64mm x 36mm).

Power input and connection to the LED Ribbon is through high-quality rising clamp terminal blocks which simplify connections to the board or optionally soldering directly to the PCB.

The processor used on the LED Dazzler is a PICAXE-08M processor, and comes shipped preprogrammed from us when you purchase a fully assembled system or a kit of parts. If you have a PICAXE Programmer, you can easily customize the displays and sequences of the included processor or use your own processors.

For more information and technical details on the LED Dazzler, please visit our Support Site.

 

Components Required to Assemble The Kit (Not Included)

PC Board
(1) LED Dazzler PCB (included)

Capacitors:
(1) .1uF Capacitor
(1) .47uF Capacitor
(1) 33uF 50v Electrolytic Capacitor

Sockets, Headers, Connectors and Switches:
(1) 8-pin DIP Socket
(1) Rising Clamp Terminal Block (4 Position)
(1) Rising Clamp Terminal Block (6 Position)
(1) 9v Battery Connector

Semiconductors:
(1) LED Dazzler PICAXE-08M Processor (Preprogrammed)
(1) LM2940CT-5.0-ND TO-220 Case


More information and ordering information for the HL1606 based LED Ribbon is available for the items web store listing.

The LED Dazzler is offered as a stand-alone unit without a HL1606 compatible LED Ribbon or with various length options. If you will be running your LED Dazzler from a battery supper (or using the included regulator), we highly recommend using lengths of up to 1m in lengths. Longer lengths will draw more current through the regulator and increase its operating temperature. For lengths longer than 1m, our recommendation is to use the regulated 5v power supply input option to the board.

We have also prepared a detailed user guide and construction manual available in PDF format.

This item is only the bare PCB, no components are included.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

LED Dazzler Bare PCB

Bare PCB - You Supply The Parts
  • Product Code: LED Dazzler PCB
  • Availability: In Stock
  • $4.00 USD


Related Products

Proto-24 BasicStamp Prototype Board

Proto-24 BasicStamp Prototype Board

BASICStamp 2 Prototyping Board

Proto-24 BASIC Stamp 2 Prototyping Board The Proto-24 is a general-purpose prototyping platfor..

$1.95 USD $9.95 USD

LED Blinky Kit DIY LED Flasher

LED Blinky Kit DIY LED Flasher

Available in Different Colors

LED Blinky Kit The LED Blinky dual LED flasher is one of our simplest projects ever, can be as..

$5.00 USD

Gel Cell Charger PC Board

Gel Cell Charger PC Board

Gel Cell batteries have become very popular in the last few years, rapidly dropping in price to a le..

$4.00 USD

HL1606 RGB LED Strip - 1M

HL1606 RGB LED Strip - 1M

1 m - 39.4 inch Flexible Strip

The latest in LED lighting is here, and it’s amazing. Each meter of the LED ribbon contains 32 ultra..

$6.95 USD $19.95 USD

LED Rainbow Bare PCB

LED Rainbow Bare PCB

Bare Board - You Supply The Parts

LED Rainbow Bare PCB The LED Rainbow is a dedicated Pulse Width Modulation (PWM) controller wh..

$4.00 USD

LED Dazzler v1 Processor

LED Dazzler v1 Processor

The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. This is ..

$5.00 USD

HL1606 RGB LED Strip - 5M

HL1606 RGB LED Strip - 5M

5m - 16.4 feet Flexible Strip

The latest in LED lighting is here, and it’s amazing. Each meter of the LED ribbon contains 32 ultra..

$89.95 USD

Proto-40 Prototype Board

Proto-40 Prototype Board

Bare Board - You Supply Components

Proto-40 40-Pin PIC Micro Prototyping Board The Proto-40 is a general-purpose prototyping plat..

$4.95 USD $9.95 USD

LED Dazzler Controller

LED Dazzler Controller

Kit of Parts For LED Dazzler

The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. Using minim..

$12.00 USD

HL1606 DMX or Stand-Alone Controller

HL1606 DMX or Stand-Alone Controller

Controller allows for DMX or stand-alone control of HL1606 based LED Ribbons. Allows for full contro..

$39.95 USD

Flexible Ribbon LED Light Strip 1M

Flexible Ribbon LED Light Strip 1M

1m - 39.4" Length

Flexible Ribbon LED Light Strip 1 Meter (39.4 inch) Designed for the average home owner as wel..

$4.00 USD $5.99 USD

LED Dazzler Controller Kit

LED Dazzler Controller Kit

With 1m HL1606 Ribbon

The LED Dazzler is a very complex, yet simple design to control HL1606 based LED ribbon. Using minim..

$19.95 USD $31.95 USD

LED Blinky Board DIY Blank PCB

LED Blinky Board DIY Blank PCB

You Supply The Parts

LED Blinky Bare LED Blinky Board The LED Blinky dual LED flasher is one of our simplest projec..

$1.50 USD

Tags: led, dazzler, bare, pcb, hl1606, products blank, project, pcbs